Specialty Coatings
Home
Bedliner
Caliper
Chassis / Frame paints
Electroplating
Engine Compartment Paint
Metal Blackening
Specialty Primers
Suspension Paint
Trunk
Wheel Paints
Send to a Friend!


Search
Welcome to Sparkles Auto Parts Restoration Online Store!

Suspension Paint
10109z.jpg Aluma Blast Paint aerosol 12oz.
Can$15.59
10109Z
Aluma Blast Paint is specially formulated to duplicate the original look of cast aluminum car parts. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on intake manifolds and transmission housings.

Quantity   
10000z.jpg Chassis Black - Gloss Aerosol 14oz.
Can$19.49
10000Z
Gloss Chassis BlackŪ produces an 85% Gloss for a custom look with superior protection. It is a specially formulated coating that resists chips, corrosion & temperatures up to 300 degrees F; covers 8 sq. ft. (up to 4 times faster than similar sized aerosols), average sized car uses just 3 to 5 cans for the entire chassis! Works great over bare metal or Eastwood Rust Encapsulator, or Eastwood Chassis BlackŪ Primer.

Quantity   
10025z.jpg Chassis Black - Satin Aerosol 14oz.
Can$19.49
10025Z
Not glossy, not dull, just right! Authentic 60-70% gloss looks great on suspension parts and frame. Also available in Qts (covers 40 sq. ft.). Aerosol (covers 8 sq. ft.). Proper for all makes and models. Tough formulation resists chips, corrosion and temperatures up to 300 degrees F; covers fast, up to four times the coverage of similar size Aerosols.; cover entire chassis with just 3-5 cans! (Available in quarts, spray only). Smoothly applies over bare metal, Eastwood Rust Encapsulator, or Eastwood Chassis Black Primer.

Quantity   
10280z.jpg Clear Zinc aerosol 12oz.
Can$15.59
10280Z
Duplicate Plating with the Ease of an Aerosol Application - Clear Zinc duplicates the exact appearance of Clear Zinc plating. This blue/gray OEM plating was used on a variety of components such as: disc brake dust shields, coil brackets, pulleys, alternator fans, vacuum advance canisters, relays, hose clamps and misc. brackets. Eastwood has duplicated the exact hue in a durable, easily applied aerosol enamel formulation. Resists temperatures up to 300 degrees F. 12 oz net wt. aerosol covers up to 6 sq. ft. 11-15% gloss. PRE Painting Prep (10041Z) removes residual grease and oil for good adhesion.

Quantity   
10036z.jpg Detail Gray Paint aerosol 13oz.
Can$15.59
10036Z
This Detail Paint is specially formulated to duplicate the original look of die cast and stamped steel. Protected up to 250 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on alternator and distributor housings.

Quantity   
11172z.jpg Extreme Chassis Black High Gloss aerosol 15oz.
Can$25.99
11172Z
You spent many hours prepping your frame; now paint it with the best Chassis Black formulation available. Up to 3X more durable than Original Chassis Black. This maximum durability formulation offers improved brake fluid, fuel, solvent, chip and scratch resistance. For improved adhesion prime clean bare metal with Extreme Chassis Black Primer aerosol (11193Z), qt. (11194ZP), or gal. (11195ZP). Prime rusty metal with Eastwood Rust Encapsulator. Allow 15-20 minutes between coats of Extreme Chassis Black. Can be recoated at any time without lifting.

Quantity   
11175z.jpg Extreme Chassis Black Satin aerosol 15oz.
Can$25.99
11175Z
You spent many hours prepping your frame; now paint it with the best Chassis Black formulation available. Up to 3X more durable than Original Chassis Black. This maximum durability formulation offers improved brake fluid, fuel, solvent, chip and scratch resistance. For improved adhesion prime clean bare metal with Extreme Chassis Black Primer aerosol (11193Z), qt. (11194ZP), or gal. (11195ZP). Prime Rusty Metal with Eastwood Rust Encapsulator. Allow 15-20 minutes between coats of Extreme Chassis Black. Can be recoated at any time without lifting.

Quantity   
10022z.jpg Silver Cad aerosol 12oz.
Can$15.59
10022z
This easy-to-apply, single step aerosol system has been specially formulated to recreate the look of actual silver cadmium plating. Not merely silver paint, Silver Cad faithfully recreates the bluish-silver tint of the original. Perfect for coil clamps, alternator pulleys, carburetor and transmission linkage rods and much, much more! Acrylic lacquer withstands up to 250 degrees Farenheit.

Quantity   
10032z.jpg Spray Gray Detail Paint aerosol 12oz.
Can$15.59
10032Z
Spray Gray Detail Paint is specially formulated to duplicate the original look of cast iron parts on your car. Protected up to 250 degrees F by this paint, metal parts on your car will keep that brand new look for a long time. Available in aerosol and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on cast iron water pumps, intake manifolds, master cylinders and more.

Quantity   
10281z.jpg Zinc Phosphate aerosol 12oz.
Can$15.59
10281Z
Duplicate the Factory Appearance of Zinc Phosphate - Zinc Phosphate duplicates OEM Zinc Phosphate plating. This charcoal gray OEM plating was used on inner and outer tie rod ends, tie rod adjustment sleeves, center links, some spindles hood hinges and latches, sway bars and some shift and carb linkages. Duplicated to match the exact appearance of Zinc Phosphate plating in a very durable enamel aerosol formulation. Temp. resistant to 300 degrees F, one 12 oz. net wt. covers up to 6 sq. ft. 4-8% gloss. Use PRE Painting Prep (10041Z) to remove residual grease and oil before coating.

Quantity   
11181.jpg Eastwood Billet Rechargeable Aerosol Can
Can$71.49
11181
The Eastwood Billet Aluminum Rechargeable Air Can provides a uniform spray mist for most light liquids - without dangerous propellants. Instead, this sprayer uses compressed air up to 100 psi max. As easy to use as an aerosol... just point and spray paint, thin oils, penetrants, and solvents. And, they are refillable and rechargeable with compressed air. If you run out of product or want to change liquids, just depressurize, refill up to just under one quart, close and recharge. It's that simple!

Quantity   
Please feel free contact us by; Phone: 1-902-888-2635 Cell: 1-902-432-9219 Toll Free: 1-877-333-2635 Fax: 1-902-888-2014